Battery-Powered Compression Tools | Wire Rope Splice
Nicopress® battery-powered compression tools are for use with Nicopress sleeves and dies and provide operator convenience and speed for wire rope splicing tasks. Additionally, their compact size permits use in confined areas where traditional compression tools cannot be used.
All Tools Supplied with
- Basic tool with wrist strap
- Two batteries
- A/C battery charger
- Molded carrying case
Die Selection Chart for Crimp Compression Tools
Battery Charger & Battery Pack for Battery Powered Compression Tools
Nicopress® Model 5506
Jaws rotate 360 degrees for ease of use in confined spaces.
Features
- One hand operation; lightweight & slim
- Visible orange weather resistant housing
- Audible bypass when predetermined pressure is achieved
- Crimping jaws can be opened mid-cycle to adjust connection
- Crimp cycle time: less than 6 seconds
- Battery charge time: less than 1 hour
Specifications
- Weight: 6.75 lbs. with Battery
- Dimensions: 20.5" L x 4" H x 2.5" W
- Wire Rope Sizes: 3/64" thru 5/16"
Crimps per Charge — Model 5506
| Wire Rope Diameter | Sleeve/ Connector | Die | Approx. No. of Crimps |
|---|---|---|---|
| 1/4" | 18-10-F6 | 6-Oval-F6 | 250 |
Nicopress® Model 5612
The 5612, weighing just 14.75 pounds was specifically designed for use in single-handed operation in overhead applications. This allows one hand to control the work while the other hand is free to operate the tool with a wide range of wire rope sizes.
Features
- One hand operation
- Rotational head
- Rapid advance
- Ergonomically balanced
- Ergonomic pistol grip handle
- Weather resistant housing
- Audible bypass when predetermined pressure is achieved
Specifications
- Weight: 14.75 lbs. with Battery
- Dimensions: 15.5" L x 12" H x 3" W
- Wire Rope Sizes: 3/64" thru 1/2"
Crimps per Charge — Model 5612
| Wire Rope Diameter | Sleeve/ Connector | Die | Approx. No. of Crimps |
|---|---|---|---|
| 1/2" | 18-25-K8 | 12-Oval-F8 | 65 |
Nicopress® Model 5512
Offers a wider handle opening with finger grooves, allowing easier access for gloved work. The base of the tool is contoured for stability and incorporates finger grooves for a better grip.
Features
- Rotational head
- Rapid advance
- Ergonomically balanced
- Weather resistant housing
- Audible bypass when predetermined pressure is achieved
Specifications
- Weight: 19 lbs. with Battery
- Dimensions: 18" L x 10.5" H x 3.5" W
- Wire Rope Sizes: 3/64" thru 1/2"
Crimps per Charge — Model 5512
| Wire Rope Diameter | Sleeve/ Connector | Die | Approx. No. of Crimps |
|---|---|---|---|
| 1/2" | 18-25-K8 | 12-Oval-F8 | 65 |